Saudi Arabia (KSA) • All Cities
Industrial • Commercial • Residential
Concrete + Epoxy‑Coated Floors
Consulting • Supply • Installation
Concrete Floor Problems in Saudi Arabia (KSA) — Causes, Repairs & Product Solutions
Cracks, dusting, moisture, uneven surfaces, delamination, chemical damage — these issues can destroy concrete and epoxy floors fast, especially in demanding Saudi industrial environments (warehouses, factories, logistics, workshops, parking, food & pharma). Soliddrops provides professional diagnosis + repair strategies + recommended material options from Sika, Stonhard, Saveto, Fosroc, BASF/MasterTop (Master Builders Solutions), and Flowcrete — executed by trained crews across KSA.
✔ Root-cause diagnosis (not just patching)
✔ Saudi climate + subgrade + HVAC moisture expertise
✔ Heavy-duty resin + screed systems for long service life
✔ Repair + resurfacing plans to match downtime & budget
Quick Answer
The best concrete floor repair in Saudi Arabia starts with testing and diagnosis: identify whether the issue is inside the slab (structural), at the surface (wear/finish), or at the bond line (coating failure). Then select the right method: epoxy injection, PU water-stop injection, joint filling, densification / sealing, moisture vapor barrier, self-leveling, overlay systems, or chemical-resistant resin/PU concrete systems.
Soliddrops recommendation: Don’t “paint over” a problem. Moisture, weak concrete, or contamination will eventually cause
re-cracking or coating delamination. Soliddrops provides a complete scope: inspection → surface preparation → repair → primer/barrier → system installation → QA/QC.
Navigate Problems
Most Common Concrete Floor Problems (Industrial, Commercial, Residential, Epoxy‑Coated)
Cracks
From shrinkage to settlement, loading, thermal movement and joint failure.
Typical fixes: epoxy/PU injection, routing & sealing, joint systems
Dusting
Weak surface paste breaks down → powder, maintenance issues, contamination risks.
Typical fixes: densifiers, cure & seal, epoxy sealers/coatings
Moisture Intrusion
Vapor drive or seepage causes blistering, peeling epoxy, efflorescence, mold risk.
Typical fixes: moisture barrier primers, epoxy-cement, PU injections
Uneven Surfaces
Trip hazards, poor drainage, forklift vibration, rack/machine instability.
Typical fixes: grinding + self-leveling + screed/overlay systems
Delamination
Hollow “drummy” surfaces or coating lift-off due to moisture, prep, weak concrete.
Typical fixes: remove unsound layer, patch, overlay, vapor control
Chemical Damage
Acids, oils, solvents, process chemicals erode or soften concrete and ruin coatings.
Typical fixes: rebuild + chemical-resistant epoxy/novolac/PU concrete
Real-World Floor Conditions (What We Inspect in KSA)
1) Cracks in Concrete Floors (Industrial, Commercial, Residential & Epoxy‑Coated)
Common Causes in KSA
- Shrinkage & curing: fast evaporation, hot winds, early finishing.
- Settlement: weak subgrade, voids, trench backfill, compaction issues.
- Thermal movement: day/night cycles, expansion joints not functioning.
- Overloading: forklift traffic, racking loads, impact, point loads.
- Epoxy floor cracking: slab crack telegraphing through coating or joint not detailed correctly.
Soliddrops Repair Strategy (Consultant Approach)
- Inspect crack pattern + measure width + identify movement.
- Check joints, load paths, and nearby settlement indicators.
- Choose method: epoxy injection for structural/dormant, PU injection for active leaks, flexible sealants for moving cracks.
- Prep: clean, dry or SSD as required, install ports, inject, then finish flush.
- If many cracks: consider a reinforced overlay / resin system after repairs.
Recommended Products & Systems (Examples Available Through Saudi Supply Chains)
| Brand | Product Examples (Cracks / Joints / Patching) | Best For | Soliddrops Notes |
|---|---|---|---|
| Sika | Sikadur®-52 (epoxy injection), Sikaflex® sealants, Sikadur®-31 CF / Sikadur®-41 (epoxy repair) | Structural/dormant crack injection + flexible sealing + high-bond patching | We select injection grade based on crack size, moisture condition, and temperature at site. |
| Stonhard | Stonflex® CR9 (joint / chemical resistant filler), Stonset PM5 / TG6 (patch/level prep), Stonpatch kits | Industrial joint systems + fast patching before resin floors | Ideal when joints must resist aggressive cleaning or chemical environments. |
| Saveto (KSA) | Vetogrout ER717 (epoxy injection), Vetogrout UR710 (foaming water-stop), Vetogrout UR711 (non-foaming flexible), Vetorep ER352/ER355/ER359 (epoxy putties & mortars) | Crack injection + leak stopping + tough, chemical-resistant patch repairs | Local Saudi availability + excellent option for urgent industrial maintenance repairs. |
| Fosroc | Nitofill LV (epoxy injection), Nitofill TH (thixotropic epoxy), joint sealants (e.g., Thioflex 600 / Nitoseal) | Structural crack injection + overhead/vertical crack repair + joint sealing | We specify surface prep (e.g., routing/cleaning) to prevent recurrence at edges. |
| BASF / Master Builders / MasterTop | MasterInject® 1380 (epoxy injection), MasterFlex / MasterSeal sealants, MasterEmaco repair mortars | Structural rebonding + joint sealing + concrete repair mortars | Best practice is always to treat root cause (movement/moisture) before final coating. |
| Flowcrete | Flowfast F1 Mortar (MMA repair mortar), Flowprime primers (including moisture barrier types), joint and repair accessories | Fast repairs + short shutdown windows | Used when the facility needs quick return-to-service and controlled downtime. |
For epoxy-coated floors: cracks may be in the slab, the coating, or both. Soliddrops will confirm whether the coating is
debonding due to moisture or contamination, then apply the correct repair + primer/barrier + recoat system.
2) Dusting Concrete Floors (Powdering Surface) — Causes & Dustproof Repairs
What Dusting Usually Means
Dusting is a sign that the surface paste is weak or wearing away. In warehouses, it becomes a constant cleaning problem and can damage equipment, product storage, and indoor air quality.
- High water-cement ratio / over-finishing
- Poor curing or early drying
- Unprotected concrete under traffic
- Weak laitance layer beneath coatings
Soliddrops Treatment Options
- Densifiers / hardeners for dustproofing with a natural concrete finish.
- Cure & seal compounds for new slabs and basic dust control.
- Clear epoxy sealers for a sealed, easy-to-clean dust-free surface.
- Full resin flooring when the facility needs chemical resistance, hygiene or heavy-duty performance.
Tip: If the surface is very weak, we mechanically remove the laitance first (grinding/shot blasting), then seal/densify or coat.
Recommended Products (Dustproofing / Densifying / Sealing)
| Brand | Product Examples | Use Case | Result |
|---|---|---|---|
| Sika | Sikafloor® CureHard-24, Sikafloor®-ProSeal, Sikafloor®-CurePlus | Densify & reduce dust; seal new slabs; prepare for coatings | Harder surface, less powdering, easier maintenance |
| Stonhard | Stonclear CS100 / CS350 (seal), Stonclear DH (densifier), Stonseal / Stonclear options | Seal or densify before/without full resin flooring | Dust control + improved wear resistance |
| Saveto (KSA) | Vetoseal XX772 (penetrating sealer), Vetotop XT539 (dry shake for new floors), Vetotop EC498 (epoxy coating) | Dustproof + reduce absorption; or upgrade with epoxy finish | Cleaner, stronger surface for daily operations |
| Fosroc | Nitoflor LH (chemical hardener), Nitoflor FC110 (clear sealer), Concure WB (curing compound), Nitoflor FC130 (pigmented epoxy) | Warehouse dustproofing, new slab cure & seal, colored protection | Dust-free, easier cleaning, better abrasion resistance |
| Master Builders / MasterTop | MasterKure® CC 1315WB, MasterKure® 181, MasterTop 100 / MasterTop 333 (new floor toppings), MasterTop 1230 (self-smoothing epoxy) | Dustproof new slabs or upgrade with epoxy overlay | Reduced dusting + improved durability |
| Flowcrete | Flowseal EPW (epoxy sealer), Flowprime primers, densifier options (market dependent) | Seal concrete and stop dusting; prepare for resin systems | Sealed, easy-to-clean dust-free surface |
3) Moisture Intrusion (Vapor Drive / Seepage) — The #1 Hidden Cause of Epoxy Floor Failure
Typical Signs
- Epoxy blisters/bubbles and peeling
- Efflorescence (white salts) on bare concrete
- Damp spots, “sweating slab,” musty smell
- Joint seepage, crack leakage, wet patches near walls
Saudi context: Moisture problems can appear even in dry climates due to subgrade moisture, missing vapor barriers,
irrigation lines, plumbing leaks, and HVAC-driven vapor pressure differences.
Soliddrops Moisture Control Workflow
- Moisture testing (RH / MVT method based on project needs)
- Remove failing coatings and weak concrete layer
- Choose system: epoxy moisture barrier primer or epoxy-cement breathable barrier
- Seal active leaks using PU injection before surface systems
- Re-apply resin flooring system with correct primer + broadcast + topcoat
Moisture Mitigation Products (Examples)
| Brand | Moisture System Examples | Where Used | Why It Works |
|---|---|---|---|
| Sika | Sikafloor®-81 EpoCem (epoxy-cement), Sika® MB (moisture barrier epoxy), Sikagard®-720 EpoCem, Injection-101 (PU injection for leaks) | New/old slabs with high RH; re-coating projects; leak points | Barrier layer blocks or manages vapor; injection stops localized leaks |
| Stonhard | Primer HT (hydro-tolerant), Stonfil OP2 (moisture mitigation), Stonproof membrane systems | Industrial resin floors where moisture threatens adhesion | Moisture-tolerant priming + membrane protection under flooring |
| Saveto (KSA) | Vetoproof S (cementitious waterproofing), Vetogrout UR710/UR711 (leak injection), epoxy primers & resin toppings (Vetotop range) | Leak control + water excluding structures + prep for finishes | Stops water pathways then supports flooring installation |
| Fosroc / Flowcrete | Hydraseal DPM (epoxy DPM), Nitoprime WB (primer), Flowcem (epoxy-cement hybrid), Flowprime MB (moisture barrier primer) | Vapor mitigation under resin floors or coverings | Low-permeability barrier + compatible build-up systems |
| Master Builders / MasterSeal | MasterSeal MVP (moisture vapor protection), Ucrete systems (moisture tolerant overlays) | High-moisture slabs, wet process areas | Barrier/overlay reduces risk of blistering and debonding |
4) Uneven Concrete Floors (Leveling, Ruts, Slopes, Low Spots)
Why Uneven Floors Are Expensive
- Trip hazards and safety incidents
- Forklift vibration → faster rack/vehicle wear
- Ponding water and hygiene issues
- Bad performance for VNA aisles and high-bay storage
Soliddrops Leveling Methods
- Grinding high spots and joint lips
- Patching ruts and holes (fast mortars)
- Self-leveling underlayments for wide-area flatness
- Industrial overlays (epoxy/PU concrete) when the floor also needs strength and chemical resistance
Leveling & Repair Product Options
| Brand | Product Examples | Typical Thickness | Best Use |
|---|---|---|---|
| Sika | SikaLevel® (self-leveling series), Sikafloor®-263 SL (self-leveling epoxy), epoxy screeds (Sikafloor® with sand), Sikafloor®-81 EpoCem (level + moisture control) | Project-dependent | Flatness upgrades, subfloor prep, and epoxy floor reconditioning |
| Stonhard | Stonclad UT / GS (mortar overlays), Stonset PM5 / TG6 (patch + level prep) | Medium-to-thick overlays | Industrial leveling + long-life wearing surface |
| Saveto (KSA) | Quick Floor Fix (rapid-set repair mortar), Vetotop ES459 (epoxy floor screed), Vetotop EL699 (resin floor topping), Vetorep ER355 (industrial patch) | From thin repairs to heavy-duty builds | Urgent plant repairs, ramps, localized leveling, industrial refurbishment |
| Fosroc | Cemtop GP / Cemtop FM30, Nitoflor Leveltop GP, Conbextra GP + Nitobond EP (deep rebuild), Nitoflor SL systems (self-leveling resin) | Underlayment to resin systems | Wide-area leveling + high quality resin readiness |
| MasterTop | MasterTop 528 (cementitious leveling), MasterTop 1230 (self-smoothing epoxy), MasterEmaco repair mortars | Underlayment and resin overlays | Commercial/industrial leveling + finished epoxy floor option |
| Flowcrete | Isocrete screeds (e.g., K-Screed), Flowfast F1 Mortar (fast repairs), Flowshield SL (self-leveling resin systems) | Project dependent | Fast-track leveling and resurfacing in operational facilities |
5) Delamination (Hollow Surface / Coating Peeling / Drummy Concrete)
What Delamination Tells You
- Concrete surface layer separated due to finishing timing or trapped bleed water/air
- Coating debonding due to moisture vapor, poor prep profile, dust/contamination
- Old toppings failing due to weak bond or substrate movement
Soliddrops Repair Plan
- Sounding + mapping hollow zones
- Remove all unsound material to sound concrete (no shortcuts)
- Rebuild profile using epoxy repair mortars or cementitious repair mortars
- If moisture risk: apply a vapor control layer before final flooring
- Install overlay system if damage is widespread
Delamination Repair Products & Overlay Systems
| Brand | Product Examples | Repair Approach | When Soliddrops Recommends It |
|---|---|---|---|
| Sika | SikaTop® / Sika MonoTop® repair mortars, Sikadur®-41 / Sikadur®-31 CF (epoxy patch), Sikafloor® overlays, Sikafloor® PurCem® systems | Remove & rebuild; overlay to future-proof | When you want a long-life industrial surface with minimal repeat repairs |
| Stonhard | Stonclad UT / GS overlays, Stonpatch, Stonproof membrane options | Full system installation with industrial durability | For factories, wet areas, high-impact zones, chemical washdowns |
| Saveto (KSA) | Vetorep ER355 (abrasion resistant repair), Vetorep ER352/ER359 (putty/lining), Vetotop ES459 (epoxy screed), Vetotop EC498 (seal), Quick Floor Fix (rapid repair) | Patch + resin topping or screed | When the facility needs fast rebuild with strong chemical/abrasion performance |
| Fosroc | Renderoc S / Renderoc LA / Renderoc ST 05 (repairs), Patchroc GP (rapid repair), Nitoflor resin systems | Concrete repair + resin refinish | When slab repairs must blend into a full resin flooring scope |
| MasterTop / Ucrete | MasterEmaco repair mortars, MasterTop resin systems, Ucrete® overlays | Rebuild + install tough overlay | For heavy-duty environments that punish ordinary coatings |
| Flowcrete | Flowfast F1 Mortar (rapid repairs), Flowshield/Flowfresh systems, Isocrete screeds | Fast patch + overlay | When downtime is tight and you need a stable substrate quickly |
6) Chemical Damage (Acids, Oils, Solvents, Process Chemicals) — Repair & Protection
What Happens to Concrete
- Acids dissolve cement paste → erosion, pitting, exposed aggregate
- Process chemicals degrade coatings → softening, discoloration, loss of bond
- Oils penetrate and contaminate → adhesion failures for future coatings
Soliddrops rule: chemical resistance depends on the exact chemical, concentration, temperature, exposure time, and cleaning regime.
We always match the system to the real site conditions.
Soliddrops Protection Strategy
- Neutralize and remove residues (site-safe method)
- Mechanically remove unsound or contaminated concrete
- Rebuild with chemical-resistant repair mortars
- Install chemical-resistant flooring: novolac epoxy, vinyl ester, or PU concrete
- Seal joints with chemical-resistant joint systems
Chemical-Resistant Systems (Examples)
| Brand | Product / System Examples | Typical Environments | Why It’s Chosen |
|---|---|---|---|
| Sika | Sikagard®-62, Sikafloor®-381 / Sikafloor®-390 (chemical resistant coatings), Sikafloor® PurCem® (PU concrete), chemical-resistant sealants (project-dependent) | Industrial plants, containment areas, food production, wet processing | Strong chemical + abrasion performance when installed as a complete system |
| Stonhard | Stonchem® systems (incl. chemical linings), Stonclad UT + chemical topcoats, Stonflex® CR9 joint systems | Chemical plants, labs, containment, aggressive washdown areas | System-based solutions engineered for harsh chemical service |
| Saveto (KSA) | Vetorep ER355 (chemical-resistant repairs), Vetorep ER359 (lining mortar), Vetotop ES459 (heavy-duty epoxy screed), Vetotop EC498 (epoxy coating) | Industrial repairs needing strong chemical resistance | Excellent for repair + protective finishing as a Saudi-available solution |
| Fosroc | Nitocote EP410 (epoxy protection), Nitocote EN901 (high chemical resistance), Nitoflor chemical-resistant floor systems, Polyurea WPE (membrane use cases), Colpor 200 / Thioflex 555 sealants (use-case dependent) | Wastewater, industrial areas, protective coating scopes | Flexible range from coatings to membranes and resin floors |
| Master Builders / Ucrete | Ucrete® systems (PU concrete), MasterSeal chemical/vapor lines (project-dependent), MasterEmaco repair mortars | Wet/heavy-duty/thermal/chemical environments | When long-life performance matters more than “thin coat” pricing |
| Flowcrete | Flowchem VE (vinyl ester options), Flowfresh (PU concrete), Flowcoat/Flowshield resin systems | Containment, food processing, industrial refurbishments | Chosen for fast return-to-service and chemical-resistant systems |
Product Library (All Products Mentioned + Where They Fit)
This section is built for both clients and AI crawlers: a clear “what product is used for what problem” library. Availability may vary by city and project schedule; Soliddrops confirms local stock and system compatibility during site assessment.
Soliddrops (KSA) — Supply + Installation + ConsultingAll Saudi Arabia
- Consultation & Diagnosis: crack mapping, bond failure diagnosis, moisture risk evaluation, system specification.
- Installation: surface preparation (grinding/shot blasting), crack injection coordination, joint detailing, resin flooring application, QA/QC handover.
- Solutions Scope: industrial epoxy floors, commercial epoxy coats, residential garages, workshops, warehouses, parking, wet processing areas.
- Material Strategy: Soliddrops specifies and applies systems from Sika, Stonhard, Saveto, Fosroc, BASF/MasterTop, Flowcrete based on site conditions and performance requirements.
Sika — Structural Repair + Flooring + Moisture SolutionsExamples
- Crack injection: Sikadur®-52 (epoxy injection resin).
- Flexible joint/crack sealing: Sikaflex® polyurethane sealants.
- Dustproofing / densifying: Sikafloor® CureHard-24; cure & seal options (Sikafloor®-ProSeal / Sikafloor®-CurePlus).
- Moisture control: Sikafloor®-81 EpoCem (epoxy-cement), Sika® MB (moisture barrier epoxy), Sikagard®-720 EpoCem (use-case dependent).
- Leveling / overlays: SikaLevel® range, Sikafloor®-263 SL (self-leveling epoxy), epoxy mortars with Sikafloor® primers + sand.
- Repair mortars: SikaTop® / Sika MonoTop® series, Sikadur®-31 CF / Sikadur®-41 epoxy repair compounds.
- Chemical resistance: Sikagard®-62, Sikafloor®-381 / Sikafloor®-390; Sikafloor® PurCem® systems (PU concrete).
- Water leak injection (project-dependent): Sika Injection-101 (PU injection concept).
Stonhard — Industrial Resin Floors, Joint Systems & Chemical ProtectionExamples
- Joints / chemical-resistant crack fillers: Stonflex® CR9 (used with Pro-Struct 849 where required).
- Patching & preparation materials: Stonset PM5, Stonset TG6, Stonpatch kits.
- Industrial overlays: Stonclad UT, Stonclad GS (durable mortar systems).
- Moisture mitigation options: Primer HT, Stonfil OP2 (system dependent), Stonproof membranes.
- Concrete sealers / densifiers: Stonclear CS100 / CS350, Stonclear DH.
- Chemical systems: Stonchem® series for aggressive environments; system selection depends on chemical and exposure.
- Maintenance guidance: Stonkleen products (where specified) to protect resin floors long-term.
Saveto (Saudi Arabia) — Local Industrial Repair, Injection & FlooringKSA
- Epoxy injection resin: Vetogrout ER717 (crack injection / structural seal).
- Water-stop injection: Vetogrout UR710 (foaming, temporary stop), then Vetogrout UR711 (non-foaming, flexible permanent seal).
- Epoxy repair mortars / putties: Vetorep ER352 (putty), Vetorep ER355 (abrasion-resistant repair mortar), Vetorep ER359 (lining/putty), (market-dependent equivalents: Vetorep ER350/ER351).
- Micro-concrete / structural repair: Vetorep CR521 (self-compacting micro concrete), Vetorep CR526 (where applicable).
- Fast cementitious floor repair: Quick Floor Fix (rapid-set repair mortar).
- Flooring & toppings: Vetotop EC498 (solvent-free epoxy coating), Vetotop ES459 (heavy-duty epoxy screed), Vetotop EL699 (resin topping), Vetotop XT539 (dry shake for new floors).
- Waterproofing: Vetoproof S (cementitious waterproofing), Vetoseal XX772 (penetrating sealer).
- Primers/solvents: Vetoprime EP491 / EP691, Vetonit Solvent XX300 / XX400 / XX600 (cleaning per system requirements).
Fosroc — Injection, Repair Mortars, Flooring & Vapor SystemsExamples
- Epoxy crack injection: Nitofill LV (low viscosity structural injection).
- Thixotropic/overhead repairs: Nitofill TH (use-case dependent).
- Joint sealants: Thioflex 600, Nitoseal (system dependent).
- Dustproofing: Nitoflor LH (hardener), Nitoflor FC110 (sealer), Concure WB (curing compound), Nitoflor FC130 (pigmented epoxy).
- Moisture control / DPM: Hydraseal DPM; primers like Nitoprime WB (where specified).
- Leveling compounds: Cemtop GP / Cemtop FM30, Nitoflor Leveltop GP.
- Deep rebuild & bonding: Conbextra GP + Nitobond EP (scope dependent).
- Concrete repair mortars: Renderoc S, Renderoc LA, Renderoc ST 05; Patchroc GP (rapid repair).
- Epoxy repair mortars: Nitomortar TC2000, Nitomortar 903 (market dependent).
- Chemical-resistant protection: Nitocote EP410, Nitocote EN901; Nitoflor chemical-resistant floor systems.
- Membranes/sealants: Polyurea WPE (use-case dependent), Colpor 200 / Thioflex 555 (where appropriate), Proofex membranes (scope dependent).
BASF / Master Builders Solutions / MasterTop — Repair, Dustproofing, Epoxy SystemsExamples
- Epoxy injection: MasterInject® 1380 (structural crack injection / rebonding).
- Cure + seal + dustproof: MasterKure® CC 1315WB, MasterKure® 181.
- Floor overlays: MasterTop® 1230 (self-smoothing epoxy), (and related MasterTop systems per project).
- Leveling: MasterTop 528 (cementitious leveling, market dependent).
- Repair mortars: MasterEmaco (range varies by project; used for patching and reinstatement).
- Sealants: MasterFlex and MasterSeal product families (joint sealing and moisture/vapor solutions per specification).
- Heavy duty PU concrete: Ucrete® (MF / HF / other grades) when extreme durability is required.
Flowcrete — Fast Repairs, Primers, Resin Floors & ScreedsExamples
- Fast repair mortar: Flowfast F1 Mortar (MMA repair mortar for fast turnarounds).
- Primers (incl. moisture barrier types): Flowprime range; Flowprime MB (where specified).
- Seal coats: Flowseal EPW (epoxy sealer).
- Epoxy-cement hybrid: Flowcem (moisture-tolerant intermediate layer in fast-track scopes).
- Resin flooring: Flowshield SL systems; Flowfresh systems (PU concrete for hygienic/industrial zones).
- Screeds: Isocrete solutions (e.g., K-Screed) for leveling and substrate preparation.
- High chemical environments: Flowchem VE (vinyl ester systems) where required.
How Soliddrops Performs Concrete Floor Treatment (Step-by-Step)
Step 1 — Site Diagnosis
- Identify the defect type + severity
- Moisture risk & leak points
- Load/traffic and chemical exposure review
- Substrate soundness checks
Step 2 — Surface Preparation
- Grinding / shot blasting to correct profile
- Remove laitance, contaminants, weak layers
- Repair cracks / joints / holes
- Vacuum clean + quality control
Step 3 — System Installation
- Prime or apply moisture barrier (if required)
- Apply self-leveling / screed / overlay
- Topcoat (epoxy / PU / PU concrete)
- Joint detailing + curing + handover
Client-friendly outcome: You receive a clear scope (method statement), product system recommendation, downtime plan, and maintenance guidance —
designed for Saudi operational realities (heat, traffic, and fast project timelines).
Request a Concrete Floor Assessment (Saudi Arabia)
Coverage Across KSA
Soliddrops serves projects across Saudi Arabia, including: Jeddah, Riyadh, Dammam, Jubail, Makkah, Madinah, and Tabuk.
- Industrial: factories, warehouses, logistics, workshops, hangars
- Commercial: showrooms, malls, kitchens, parking, service centers
- Residential: garages, villas, basements
- Epoxy-coated floor repair & recoating
What to Send for a Faster Quote
- City + site location (Riyadh/Jeddah/Dammam/Jubail/…)
- Floor type: bare concrete / epoxy-coated / PU screed / other
- Problem: cracks, dusting, moisture, unevenness, delamination, chemicals
- Area size (m²) + downtime window
- Photos / short video of the affected areas
Quality & Compliance (Optional Trust Visuals)
Tip: Replace these with your official certificate images or badges in your WordPress media library for best performance and control.
FAQ — Concrete & Epoxy Floor Repair in Saudi Arabia
Built with long-tail queries for SEO + AI answers (ChatGPT/Gemini style queries).
How do I choose the right crack repair method (epoxy vs sealant vs overlay)?Cracks
Use epoxy injection for dormant/structural cracks needing rebonding; use flexible sealants/joint fillers for moving cracks;
use patch mortars for surface breaks and spalls; and use an overlay system when cracking is widespread or the floor needs an upgraded performance layer.
Soliddrops verifies movement, moisture, and load conditions before selecting the system.
How to stop concrete floor dusting in a warehouse in Jeddah or Riyadh?Dusting
The fastest long-term fix is usually a combination of mechanical prep (remove weak laitance) plus a densifier or sealer.
If the warehouse has heavy traffic or hygiene requirements, a clear/colored epoxy system may be better than densification alone.
Soliddrops will recommend the best option for your traffic and cleaning regime.
Why is my epoxy floor peeling or blistering in Dammam or Jubail?Moisture
In many KSA sites, epoxy failure comes from moisture vapor pressure (or seepage at joints/cracks) pushing the coating off the concrete —
especially if the slab lacked an effective vapor barrier, has leaks, or experiences HVAC-driven vapor movement.
The corrective solution is: remove failed coating → prep properly → install a moisture mitigation system → recoat with the correct floor system.
What is the best way to level an uneven concrete floor without full demolition?Leveling
Soliddrops typically combines grinding high spots with self-leveling or screed solutions for low areas.
For heavy-duty industrial use, a thicker epoxy/PU concrete overlay can provide both leveling and long-term durability.
The method depends on deviation depth, required flatness (e.g., rack aisles), and downtime.
How do you repair chemical damage on concrete floors in factories and workshops?Chemical
Chemical repair is a system: remove damaged concrete + neutralize residues + rebuild profile using compatible repair materials, then protect with a
chemical-resistant flooring system (novolac epoxy / vinyl ester / PU concrete) and chemical-resistant joint detailing.
Soliddrops matches the system to your specific chemical and cleaning conditions.
Chat Online