Floor maintenance chemicals · Saudi Arabia

Stonkleen Floor Cleaning Liquids in Saudi Arabia

Stonkleen is a range of five professional floor cleaning liquids — TD9, FS9, AS9, SR9 and MD9 — each formulated for one cleaning problem: tire marks, food fats, old floor finish, spot stains or hard-water scale. SolidDrops supplies and supports Stonkleen product enquiries across Saudi Arabia, from Jeddah and Riyadh to Dammam and Jubail.

WhatsApp an enquiry Compare the five formulas

Autoscrubber cleaning a warehouse floor with tire marks — where Stonkleen floor cleaning liquids are used in Saudi Arabia

Key facts

What Stonkleen floor cleaning liquids are, at a glance

A floor cleaning liquid is a concentrated maintenance chemical that is diluted in water and applied by mop, autoscrubber or spray to remove a specific contaminant from a hard floor. Stonkleen products are manufactured by Stonhard and documented in individual product data sheets (PDS); the figures below come from those sheets.

Range	Stonkleen TD9, FS9, AS9, SR9, MD9	5 formulas
Manufacturer	Stonhard (documented in Stonkleen product data sheets)	PDS rev. 05/25; MD9 rev. 06/10
Product type	Concentrated floor maintenance liquids — degreasers, stripper, spot lifter, descaler	Dilute in water, except SR9 (ready-to-spray)
Application	Mop or autoscrubber and rinse (TD9, FS9, MD9); wet strip, wet-vac, rinse (AS9); spray, dwell, wipe (SR9)	Per PDS
Storage	16–30 °C, keep from freezing	TD9, FS9, AS9, SR9 PDS
Pack formats	1 US gal cases, 5 gal pails, 55 gal drums; SR9 in 1 qt sprayers	Manufacturer references
Supply in KSA	SolidDrops — enquiry, selection support and quotation	All over KSA

Quick answer

Which Stonkleen liquid do I need?

Choose by the cleaning problem, not by the product code. Each card names the contaminant the manufacturer documents for that formula.

TD9Tire marks & heavy buildup

Petroleum oils, grease and metal oxides on warehouse and manufacturing floors.

FS9Food fats & kitchen oils

Enzyme degreaser for food-processing, food-service and restroom floors.

AS9Old floor finish

Strips and reliquefies aged, spray-buffed or multi-layer finish before a reset.

SR9Spot stains

Localised grease, food and Betadine stains in institutional and healthcare floors.

MD9Hard-water scale

Descaler for mineral deposits in showers, pool decks and wet processing areas.

SR9 and MD9 are often confused. SR9 is the spot lifter; MD9 is the mineral remover. The product-specific MD9 data sheet defines it as a descaler, so this page does not describe MD9 as a medical-stain remover.

All five products

Stonkleen TD9, FS9, AS9, SR9 and MD9 compared

Floor cleaning concentrates, measuring jug, gloves, goggles and a hard-floor sample laid out for product selection — Concentrate, measuring jug, PPE and a floor sample: what a selection review needs on the bench.

Formula	Documented primary job	Dilution / use	Equipment & method	Manufacturer pack references
TD9	Tire marks, petroleum oils, grease, metal oxides	12 oz per US gal normal · 32 oz per gal heavy · concentrate for heavy spots	Mop or autoscrubber; white scrubbing pad for tire marks; rinse	4 × 1 gal · 1 × 5 gal · 1 × 55 gal
FS9	Food fats and oils on food-processing, food-service and restroom floors	2 oz per US gal standard · 8 oz per gal extreme · concentrate for heavy spots	Mop or autoscrubber; rinse	4 × 1 gal · 1 × 5 gal
AS9	Aged, spray-buffed and multiple layers of floor finish	1:4 light · 1:3 medium · 1:2 heavy · 1:1 extra-heavy (AS9 : water)	Apply liberally, keep wet 5–10 min, wet-vac, rinse with clear water	1 × 5 gal pail · 1 × 55 gal drum
SR9	Localised grease, food, Betadine and other stains	Ready to use — shake and spray the spot	Blot fresh spills, spray, 2–3 min dwell, wipe with absorbent material, repeat if needed	6 × 1 qt
MD9	Hard-water mineral deposits on floors	2 oz per US gal standard · 4 oz per gal heavy	Mop or autoscrubber; rinse with water	4 × 1 gal · 1 × 5 gal

Manufacturer dilution values are documented starting points and are described as approximate in the product data. Confirm the current regional label, SDS, surface compatibility and the approved facility procedure before standardising a method.

Product by product

How each Stonkleen formula is used

Stonkleen TD9 — heavy-duty degreaser and tire mark remover

For manufacturing and warehouse floors

Stonkleen TD9 is a heavy-duty buildup remover that lifts tire marks, petroleum oils, grease and metal oxides from vinyl and other hard floor surfaces. It is the formula to review when forklift traffic has left black rubber transfer on a warehouse aisle, or when a machine shop floor has a film of oil that ordinary detergent leaves behind. Before broad use on a named epoxy, polyurethane or MMA system, confirm compatibility with the floor manufacturer — the TD9 sheet names vinyl and hard surfaces, not a specific resin system.

Normal accumulation: 12 oz per US gallon of water, mop or autoscrubber, then rinse
Heavy buildup: 32 oz per US gallon; the PDS recommends a white scrubbing pad for tire marks
Heavy spot treatment: concentrated product with minimal water, 2–3 minute dwell, extract and rinse thoroughly
Packaging: four 1-gallon containers, one 5-gallon container or one 55-gallon container
Storage: 16–30 °C, keep from freezing · PDS revision May 2025

TD9 product data sheet (PDF) Request TD9 in Saudi Arabia

Warehouse epoxy floor with forklift traffic lanes — the Stonkleen TD9 tire-mark and grease application — Warehouse tire marks and oil film: the TD9 use case.

Stonkleen FS9 — enzymatic degreaser for food fats and oils

For food processing, food service and restroom floors

Stonkleen FS9 is a liquid enzyme degreaser that breaks down food fats and oils on floors in food-processing plants, commercial kitchens and restrooms. It is the lighter-dilution product in the range: 2 oz per gallon covers a standard soiled floor, which matters when a central kitchen in Riyadh runs a wash-down every shift. The PDS documents the application; it does not by itself establish HACCP, food-contact, disinfectant or SFDA status, so those requirements are checked separately with the facility's hygiene consultant.

Standard cleaning: 2 oz per US gallon of water, mop or autoscrubber, then rinse
Extremely soiled floors: 8 oz per US gallon, followed by rinsing
Heavy spot treatment: concentrated product, 2–3 minute dwell, extract and rinse thoroughly
Packaging: four 1-gallon containers or one 5-gallon container
Storage: 16–30 °C, keep from freezing · PDS revision May 2025

FS9 product data sheet (PDF) Request FS9 in Saudi Arabia

Autoscrubber cleaning a food-processing facility floor — Stonkleen FS9 application — Autoscrubber wash-down in a food facility: the FS9 use case.

Stonkleen AS9 — floor finish stripper and reliquefier

For finish removal and floor reset work

Stonkleen AS9 is a floor finish stripper that reliquefies aged, spray-buffed and multiple layers of finish so they can be recovered with a wet-vac without scrubbing. The manufacturer states it is safe for all Stonhard flooring systems and most hard floor surfaces, and lists a non-ammonia, biodegradable formulation among its advantages. It is the only product in the range with its own wet-strip sequence rather than a mop-and-rinse routine, so plan the recovery equipment before the liquid goes down.

Dilution: 1:4 (light buildup), 1:3 (medium), 1:2 (heavy), 1:1 (extra-heavy) — AS9 to water
Method: apply liberally, keep the area wet for 5–10 minutes, recover with squeegee or wet-vac, rinse with clear water
Alternate machine method: the PDS describes 15–20 parts water to one part AS9 with a stripping pad
After recovery: rinse and allow the floor to dry before applying a new finish
Packaging: one 5-gallon pail or one 55-gallon drum · Storage 16–30 °C · PDS revision May 2025

AS9 product data sheet (PDF) Request AS9 in Saudi Arabia

Floor machine stripping and resurfacing a warehouse floor before a new finish — Stonkleen AS9 application — Aged finish reliquefied and recovered: the AS9 use case.

Stonkleen SR9 — stubborn stain spot remover

For institutional and healthcare floors

Stonkleen SR9 is a professional spot lifter for grease, food, Betadine and other localised stains on institutional and healthcare facility floors. It is supplied ready to use in quart sprayers rather than as a dilutable concentrate, which is why it sits with the housekeeping trolley in a hospital ward rather than in the plant room. Use it as a spot treatment according to the current label and the facility's approved procedure.

Preparation: shake well and blot fresh spills before applying
Method: spray on the spot, allow 2–3 minutes, wipe with a clean absorbent material
Repeat: repeat the spot treatment if the stain persists
Packaging: six 1-quart containers
Storage: 16–30 °C, keep from freezing · PDS revision May 2025

SR9 product data sheet (PDF) Request SR9 in Saudi Arabia

Spot-treating a localised stain on a healthcare facility floor — Stonkleen SR9 application — Localised spot lifting in a healthcare corridor: the SR9 use case.

Stonkleen MD9 — descaler and mineral-deposit remover

For showers, pool decks and wet processing floors

Stonkleen MD9 is a descaler that removes hard-water mineral deposits from floors in showers, pool decks, water processing, food processing and manufacturing facilities. Saudi municipal and well water can leave visible white scale on wet-area floors within weeks, and MD9 is the formula in this range documented for that deposit. Its product data is an older document (revised June 2010) and contains a product-name inconsistency in the storage line, so obtain the current regional label, PDS and SDS before specification.

Standard / daily maintenance: 2 oz per US gallon of water
Heavy accumulation: 4 oz per US gallon of water
Method: apply with a mop or autoscrubber, then rinse with water
Packaging: four 1-gallon containers or one 5-gallon container
Document status: PDS revised June 2010 — request current regional handling guidance

MD9 product data sheet (PDF) Request MD9 in Saudi Arabia

Shower wet-area floor with drain — the hard-water scale environment Stonkleen MD9 descaler is documented for — Hard-water scale in a shower wet area: the MD9 use case.

Applications

Where are Stonkleen liquids used in Saudi Arabia?

Start with the contaminant and the floor surface, then check the current regional label, PDS, SDS and floor-system guidance before confirming the product and method. These are the facility types the product data supports.

Warehouses and manufacturing

TD9 for tire marks, grease, petroleum oils and metal oxides on compatible hard floors — logistics parks in Jeddah, Riyadh and Dammam and industrial cities such as Jubail.

Food processing and food service

FS9 for food fats and oils on processing, kitchen and restroom floors. Do not infer food-contact or hygiene certification from the application alone.

Floor-finish removal and reset

AS9 for aged, spray-buffed or multi-layer finish; use on all Stonhard systems and most hard floors per the May 2025 PDS, following its wet strip, recovery and rinse sequence.

Institutional and healthcare

SR9 for localised grease, food, Betadine and other stains in hospitals, clinics, universities and government buildings, applied as a spot treatment.

Showers, pool decks and wet processing

MD9 for hard-water mineral deposits in hotel wet areas, sports facilities, water-processing and food-processing floors, subject to surface compatibility.

Resin floors already supplied by SolidDrops

Maintenance chemistry for epoxy and PU flooring, Stonhard fuel-resistant systems and Stonlux ESD floors — compatibility confirmed per system.

Selection workflow

How to select and approve a Stonkleen cleaning liquid

Use this sequence for a product enquiry, a maintenance-plan review or a corrective-cleaning discussion. It does not authorise a chemical for a surface; the current label, PDS, SDS and the approved facility procedure control.

Identify the surfaceRecord the floor system, finish, age, condition and any coating-manufacturer restrictions.
Identify the contaminantSeparate tire marks, oils, food fats, old finish, spot stains and hard-water scale.
Check documentsReview the current regional label, PDS and SDS for the candidate formula.
Confirm the methodRecord dilution, equipment, dwell, recovery, rinse and PPE requirements.
Test and recordFollow facility authorisation and floor-manufacturer guidance, then document the approved procedure.

Floor maintenance in progress in a Saudi healthcare corridor — mop, bucket and wet-floor signage — Safety: use cleaning liquids in ventilated areas, wear the gloves and eye protection required by the label and SDS, and do not mix chemicals unless the manufacturer specifically permits it. The May 2025 TD9, FS9, AS9 and SR9 sheets state storage at 16–30 °C and protection from freezing — relevant for containers left in un-air-conditioned stores during a Saudi summer.

Supply route

What SolidDrops provides for Stonkleen buyers in Saudi Arabia

SolidDrops is a Saudi construction-materials supplier and flooring contractor that provides a single enquiry, selection and quotation route for Stonkleen TD9, FS9, AS9, SR9 and MD9. Because we also supply and install resin flooring, the compatibility question — "can this go on my floor?" — is answered against the actual system, not a generic label.

Five formulas, one comparison

Send the surface and contaminant details and we distinguish TD9, FS9, AS9, SR9 and MD9 before commercial terms are discussed.

Document-first scope

Official PDS links, revision dates, compatibility limits and KSA availability boundaries stay visible for consultants and facility teams to review.

Enquiry details upfront

City, product code, quantity, floor system, contaminant, area, equipment, photos and required date — one message is enough to start.

Regional availability, price and delivery terms are confirmed for each enquiry. Pack formats above are manufacturer references, not stock statements.

Coverage

Stonkleen enquiries across the Kingdomفي جميع أنحاء المملكة

SolidDrops supports product enquiries all over KSA, including Jeddah, Riyadh, Dammam, Jubail, Makkah, Medina and Tabuk. This is a service-area statement and does not imply a branch in each city.

RiyadhCentral-region warehouses, hospitals and central kitchens — send facility type, surface, contaminant, area and equipment.

JeddahPort logistics, hospitality and food-service sites — include any hygiene or operating-hour constraints in the enquiry.

Dammam & JubailIndustrial and petrochemical support facilities — describe industrial contaminants, cleaning equipment and documentation required.

Makkah, Medina & TabukInclude the city, quantity, site conditions and required date for routing.

FAQ

Questions buyers ask before ordering Stonkleen

Which Stonkleen product removes tire marks on epoxy floors?

TD9 is the formula documented for tire marks, grease and petroleum oils. Its product data names vinyl and other hard surfaces, so confirm compatibility with the exact epoxy system before broad use, and follow the current TD9 label and SDS.

Which Stonkleen formula is best for food fats and kitchen oils?

FS9 is the liquid enzyme degreaser documented for food fats and oils in food-processing and food-service environments, diluted at 2 oz per US gallon for standard soiling. That application does not by itself establish food-contact, HACCP or SFDA compliance.

What is Stonkleen MD9 used for?

The product-specific MD9 data sheet defines it as a descaler and mineral remover for hard-water deposits on floors in showers, pool decks, water processing, food processing and manufacturing. It is not described there as a medical-stain remover.

What is Stonkleen SR9 used for?

SR9 is a professional spot lifter for localised grease, food, Betadine and other stains in institutional and healthcare facilities. The documented method is to shake, blot fresh material, spray the spot, wait 2–3 minutes and wipe with an absorbent material.

Which Stonkleen liquids can be used with an autoscrubber?

The TD9, FS9 and MD9 product data sheets describe mop or autoscrubber application followed by rinsing. AS9 has its own stripping method with wet-vac recovery, and SR9 is a localised spray treatment. Follow the current document for the chosen formula.

Can every Stonkleen product be used on epoxy, urethane or MMA floors?

No universal compatibility claim should be made. AS9 expressly names all Stonhard systems and most hard floors. For the other formulas, confirm the exact floor system, current product data and floor-manufacturer guidance before use — SolidDrops can check this against systems it has supplied.

Is Stonekleen the same as Stonkleen?

Stonkleen is the manufacturer spelling used in the product documentation. Stonekleen and Stonkleen floor cleaner are common search variations; use the product code and current label when requesting information or a quotation.

How much do Stonkleen cleaning liquids cost in Saudi Arabia?

Price depends on the formula, pack size (1 gal cases, 5 gal pails, 55 gal drums or 1 qt sprayers), quantity and delivery city, and is confirmed per enquiry. Send the product code, quantity and city to SolidDrops for a quotation; no list price is published on this page.

Does an epoxy floor cleaner remove uncured epoxy resin?

Not necessarily. Cleaning a cured epoxy floor is different from removing uncured resin, adhesive or coating residue. Identify the material and consult the relevant floor or chemical manufacturer before selecting a cleaner.

Do Stonkleen cleaning liquids require installation?

No. Unlike a flooring system, these maintenance liquids are applied through formula-specific mop or autoscrubber cleaning, finish stripping or localised spot treatment by the facility's cleaning team, following the current label, PDS, SDS and approved procedure.

Enquiry & quotation

Request Stonkleen product information or a quotation

Send the city, product code, quantity, floor system, contaminant, approximate area, cleaning equipment, photos and required date. Current availability and commercial terms are confirmed for each enquiry. أهلاً وسهلاً — Arabic and English enquiries are welcome.

WhatsApp +966 50 213 1112 Email [email protected]

SolidDrops — Saudi Arabia
Phone / WhatsApp: +966 50 213 1112
Email: [email protected]
Coverage: all over KSA — Jeddah, Riyadh, Dammam, Jubail, Makkah, Medina, Tabuk