SolidDrops supports Saudi project teams with specification review, product selection, BOQ routing, supply coordination, installation planning and maintenance guidance for Stonhard-style 5-coat fuel-resistant resinous flooring systems.
Direct answer for consultants, contractors and facility managers
A 5-coat fuel-resistant resinous flooring system is normally specified where concrete floors face aircraft fuel, oils, workshop chemicals, heavy rolling traffic, impact, abrasion and slip-risk conditions. The attached specification package describes a layered build using primer, epoxy mortar, grout coat and two urethane topcoats with aluminum oxide anti-skid broadcast.
SolidDrops can help Saudi Arabia projects translate that technical intent into a practical inquiry package: area, drawings, substrate condition, traffic, chemical exposure, texture requirement, color preference, joints, coving, schedule and maintenance needs.
System coats: primer, epoxy mortar, grout coat and two urethane topcoats.
Nominal system thickness: 6.25 mm in the referenced fuel-resistant specification.
Coverage: Jeddah, Riyadh, Dammam, Jubail, Makkah, Madinah, Tabuk and all Saudi project locations.
Specification-based system map
This system map translates the supplied product and specification reference into practical decision points for consultants, contractors and facility teams. It does not replace current manufacturer data, site inspection or consultant approval; it makes a Saudi project inquiry easier to assess, route and price accurately.
| Layer | Referenced Product / Component | Function For The Floor | Buyer Questions To Confirm |
|---|---|---|---|
| 1. Primer | Standard Primer or approved compatible primer | Bonding layer for prepared concrete; helps control absorption before the mortar layer. | Is the substrate clean, dry, sound, shot-blasted and above dew point? |
| 2. Epoxy mortar | Stonclad GS epoxy mortar system | Heavy-duty troweled body layer for impact, abrasion, wear and chemical exposure. | Is the target thickness 3 mm, 6 mm or the specified 6.25 mm fuel-resistant build? |
| 3. Grout coat | Stonkote GS4 epoxy grout coat | Seals the mortar texture, improves cleanability and supports abrasion and chemical resistance. | Does the project need color matching, gloss level control or extra chemical resistance? |
| 4. First topcoat | Stonseal GS6 aliphatic urethane topcoat | Durable finish layer for wear, chemical exposure and gloss appearance. | What color, cleaning method and traffic level should the topcoat support? |
| 5. Second topcoat with texture | Stonseal GS6 with No. 60 white aluminum oxide anti-skid grit where specified | Final anti-slip, wear and service surface; texture should balance safety and cleanability. | What slip resistance, washdown practice and inspection visibility are required? |
| Optional details | Walkway stripe, cove base, joint sealant, crack treatment, additional texture options | Improves traffic routing, wall-floor hygiene, joint performance and site-specific safety. | Are there drawings for joints, cove height, drainage, slopes and safety line marking? |
Applications and operating conditions
This page helps Saudi project teams compare Stonhard 5-coat fuel-resistant flooring, Stonclad GS epoxy mortar flooring and aircraft-hangar resin flooring requirements before they request a quotation. Final system selection should follow current manufacturer data, the intended exposure and the consultant’s specification.
Advantages and buyer benefits
Important: Stonhard product names are used here to explain the attached specification reference. Final material approval should follow current manufacturer data, consultant requirements and actual site conditions.
Installation and QA sequence
A reliable installation plan connects the selected materials to substrate preparation, application conditions, inspection points and the agreed return-to-service window.
Confirm whether the requirement is true fuel-resistant resinous flooring, a 5-coat epoxy mortar system, or a lighter epoxy/PU coating.
Check slab condition, moisture risk, contamination, joints, cracks, drainage, slopes, traffic and chemical exposure.
Remove weak layers, oils, wax, loose material and coatings; prepare a clean, sound profile suitable for primer and mortar bond.
Apply primer and place the epoxy mortar while the system remains within the correct application window. Finish thickness and compaction should match the selected specification.
Apply grout coat, then two urethane topcoats. Broadcast anti-skid aggregate into the specified topcoat when slip resistance is required.
Document environmental conditions, adhesion checks, finish consistency, texture approval, cleaning guidance and maintenance notes.
Product coverage
The supplied PDF references the core 5-coat stack and a wider product universe used in resin flooring, coatings, hygienic spaces, anti-slip textures and chemical-resistant areas. Use the product groups below to identify the relevant material scope before requesting current data sheets and a project-specific recommendation.
| Group | Products / Families To Keep In Scope | Typical Buyer Intent |
|---|---|---|
| 5-coat fuel-resistant build | Standard Primer, Stonclad GS, Stonkote GS4, Stonseal GS6, white aluminum oxide anti-skid grit, walkway stripe where specified. | Fuel-resistant hangar floor, heavy-duty epoxy mortar floor, USACE-style resinous flooring, workshop floor upgrade. |
| Heavy-duty Stonclad options | Stonclad GS, UT, UR, UL, UF, HT, ESD and related texture or sealer options. | Impact, thermal shock, ESD, washdown, chemical exposure, forklift traffic and heavy plant areas. |
| Coatings and sealers | Stonkote GS4, HT4, AT5, CE4; Stonseal GS6, PF7, CF7 and compatible texture aggregates. | Cleanability, gloss, color, abrasion resistance, chemical resistance and slip resistance tuning. |
| Other Stonhard families found in the PDF | Stonshield, Stonblend, Stonres, Stonlux, Stongard, Stonchem, Flowfresh, Flowshield, Stondeck. | Decorative resin, resilient commercial floors, hygienic floors, waterproof deck systems, chemical-resistant lining and secondary containment contexts. |
| SolidDrops related products | Flooring, waterproofing, sports flooring, FRP panels, chemicals trading, pigments, fire alarm systems and building materials. | One Saudi project inquiry that may also need wall protection, roof or wet-area waterproofing, construction chemicals, pigments or fire alarm materials. |
Selection guidance
Send SolidDrops the information below so the inquiry can be routed correctly. It helps separate a normal epoxy floor from a fuel-resistant resinous flooring system, a PU screed, an ESD floor, a wall-panel package or a waterproofing requirement.
Related technical guides: For BOQ and consultant packages, see how consultants specify industrial resin flooring. If the slab needs repair, crack treatment or contamination removal before installation, review concrete floor repair before epoxy coating. After handover, use the epoxy floor maintenance guide for Saudi facilities to plan inspection and cleaning.
Using areas and city coverage
SolidDrops supports project inquiries all over Saudi Arabia. For faster routing, send the city, approximate area, drawings or BOQ, photos, substrate condition, traffic, chemical exposure, cleaning method and schedule target.
Jeddah, Makkah, Madinah and nearby industrial, commercial and logistics areas.
Riyadh, industrial cities, warehouses, workshops, commercial buildings and project support areas.
Dammam, Jubail, petrochemical support zones, plants, workshops and logistics areas.
Tabuk and other Saudi locations where BOQ, material selection or project routing is required.
Arabic project support
تدعم SolidDrops استفسارات أرضيات Stonhard وStonclad GS للمشاريع الصناعية التي تحتاج مقاومة للوقود والزيوت والمواد الكيميائية وحركة المعدات الثقيلة في السعودية.
للحصول على مراجعة أسرع، أرسل المدينة، المساحة، المخططات أو جدول الكميات، صور الموقع، حالة الخرسانة، نوع التعرض للوقود أو الزيوت، ومتطلبات مانع الانزلاق.
Project teams may describe this scope in Arabic using fuel-resistant epoxy, aircraft hangar flooring, industrial resin flooring, anti-slip epoxy mortar and heavy-duty Stonhard flooring terms.
Related SolidDrops solutions
Epoxy, PU, PU-cement, self-leveling, anti-slip, ESD, decorative and heavy-duty industrial resin floors.
Roof, basement, tank, wet-area, podium, joint and concrete protection systems for Saudi project conditions.
Indoor and outdoor court surfaces, line marking, safety, grip, maintenance and school or club flooring support.
Hygienic wall and ceiling panels for food plants, kitchens, cold rooms, healthcare, laboratories and wet areas.
Construction chemicals, coating materials, repair products, sealants and pigments for flooring and concrete projects.
Fire alarm product inquiries, building-material routing and contractor procurement support when the BOQ covers multiple scopes.
Project proof and case-study readiness
Approved project photographs and case-study details can be added after client permission. For a new inquiry, SolidDrops can review the current site photos, drawings, BOQ, substrate condition and exposure details before recommending the right route.
This page is ready for an approved Stonhard 5-coat case study with city, area, substrate, preparation method, fuel or oil exposure, layer build-up, texture, downtime and maintenance notes. Until those exact photos are approved, SolidDrops keeps real project proof separate from generated specification visuals.
Share clear photos of the slab, cracks, joints, drains, coves, contamination, current coating, traffic lanes and wet or fuel-exposed areas.
Use approved before, preparation, installation, texture close-up and finished-floor photos with city, area, substrate, system build-up and maintenance note.
Consultants and owners can judge suitability faster when the floor evidence includes exposure, cleaning method, traffic load, repair scope and shutdown window.
FAQ
No. Fuel resistance does not establish compatibility with every hydraulic fluid, solvent or cleaning chemical. Provide the fluid name, concentration, temperature, contact time and spill-cleaning routine so the proposed complete system can be checked against current manufacturer resistance data.
No. Chemical resistance and electrical performance are separate requirements. If static control is specified, confirm the required electrical resistance range, grounding details, compatible system and acceptance tests before selecting the floor.
The existing slab needs assessment first. The depth of contamination, coating adhesion, moisture condition, cracks and weak concrete determine the preparation and repair scope. A trial area or testing may be needed before the new system is accepted.
It is a layered resin floor typically built with primer, epoxy mortar, grout coat and two urethane topcoats. The referenced specification uses a nominal 6.25 mm build with aluminum oxide anti-skid grit broadcast into the final service surface.
No. Stonclad GS is a troweled epoxy mortar system used where impact, abrasion, wear and chemical exposure are more severe than many thin epoxy coating applications. Final selection should follow current product data and site conditions.
It is relevant for aircraft maintenance hangars, workshops, loading bays, forklift lanes, petrochemical support zones, maintenance rooms, industrial warehouses and other areas where fuel, oil, chemicals, abrasion and heavy traffic are expected.
Yes, the referenced system includes white aluminum oxide anti-skid grit in the second urethane topcoat. Texture level should be selected carefully because higher slip resistance can make cleaning more demanding.
Send the city, area in square meters, drawings or BOQ, photos, substrate condition, expected traffic, chemicals or fuel exposure, cleaning method, color or stripe requirement, cove or joint details and schedule target.
Cost depends on measured area, substrate repair, moisture condition, crack and joint treatment, coving, drains, line marking, shutdown window, texture level, selected color and project city. A BOQ, photos and expected exposure help SolidDrops route a practical quotation instead of guessing from square meters alone.
Yes. SolidDrops supports inquiries across Saudi Arabia, including Jeddah, Riyadh, Dammam, Jubail, Makkah, Madinah, Medina, Tabuk and nearby industrial or commercial areas.
نعم. تدعم SolidDrops استفسارات أرضيات Stonhard وStonclad GS والأرضيات الإيبوكسية المقاومة للوقود في السعودية، بما في ذلك جدة والرياض والدمام والجبيل ومكة والمدينة وتبوك. أرسل صور الموقع، المساحة، المخططات أو جدول الكميات، ونوع التعرض للوقود أو الزيوت.
Yes. Send the BOQ, drawings, specification section, area, current slab photos, traffic type, fuel or oil exposure, cleaning method, texture requirement and project city. SolidDrops can review whether the requested Stonhard, Stonclad GS, Stonkote GS4 and Stonseal GS6 route is practical for the stated conditions.
Call or WhatsApp +966 50 213 1112, or email [email protected] with your project details.
Project selection and tender review
For aircraft hangar flooring and workshop projects in Saudi Arabia, the complete resin flooring build must suit the actual operating conditions. A five-coat description identifies the layer sequence; the final recommendation also needs the exposure profile, slab assessment and acceptance criteria.
List fuels, hydraulic fluids, lubricants and cleaning chemicals separately. Include concentration, temperature and expected contact time. Request written compatibility guidance for the complete proposed build.
Confirm wheel loads, turning routes, cleaning practice and the finish sample. Record electrical-performance requirements separately where the specification calls for static control.
Ask each quotation to identify preparation, repairs, layer thickness, coving, joint treatment, texture, line marking, testing and curing protection. Document exclusions and the agreed handover requirements.
Manufacturer reference: Stonclad GS epoxy mortar system and product resources. Confirm current regional data and compatibility of primer, grout coat and topcoats with the approved project specification.
لاختيار أرضيات مقاومة للوقود في حظائر الطائرات أو ورش الصيانة، حدّد أنواع الوقود والزيوت والسوائل الهيدروليكية ومواد التنظيف، وحالة الخرسانة وحركة المعدات. أرسل المدينة والمساحة وجدول الكميات إلى SolidDrops لمراجعة نطاق المشروع ومتطلبات النظام قبل التسعير.
Request a fuel-resistant floor specification reviewFor a faster response, include city, project type, area, drawings or BOQ, photos, current substrate, expected chemicals or fuel exposure, traffic level, texture requirement and schedule target.
Related Stonhard ESD specification support: For cleanroom, electronics, data-center or static-sensitive Stonhard projects, review Stonhard Stonlux ESD flooring in Saudi Arabia for system components, grounding, testing, source notes and KSA city-use guidance.
Project review before pricing
For consultants, contractors and facility teams, the important questions are not only the area. Fuel or oil exposure, traffic, substrate condition, joints, texture, cleaning and the execution window all shape the right build-up. Send the project brief and start with the decisions that make the specification practical on site.
Have a BOQ, drawing or site photos ready? Share the basics here, or send them by WhatsApp for the same project-review route.
Chat Online
Use this feature to chat with our agent.
