SolidDrops / Construction materials
Cementitious Mortars Supplier Saudi Arabia
Choose the right cement-based solution for waterproofing, crack bridging or active leak repair.
Compare five Sika product families, understand their limits and send your project requirements to SolidDrops for product selection and supply enquiries across Saudi Arabia.
Email [email protected]
The product range
Five materials. Different jobs.
Rigid coatings, flexible waterproofing, crystalline slurry, leak plugs and admixtures serve different purposes. Check the exact regional product name and current data sheet before specifying a material.
01 / Rigid waterproofing
SikaTop® Seal 107
Polymer-modified cementitious slurry
A two-part coating for waterproofing and protecting prepared concrete and masonry. The Saudi Seal-107 SA data sheet covers wet areas, basement walls and balconies or terraces beneath protection.
Before specifying: Use for sound substrates and non-moving hairline cracks. It needs a protection layer where traffic is expected. Confirm the exact local variant and drinking-water approval for tank projects.
Read Seal-107 SA data sheet02 / Flexible waterproofing
Sikalastic®-152
Fibre-reinforced, crack-bridging coating
A two-part cementitious waterproofing system for concrete protection and areas such as bathrooms, balconies and pools beneath tiles. Select the Saudi or other regional variant to match the specification.
Before specifying: Crack-bridging performance depends on variant and test conditions. It is not a structural repair or a vehicle-wearing surface. Detail joints separately; protect pool applications with suitable tiling.
Read Sikalastic-152 SA data sheet03 / Crystalline waterproofing
SikaSeal®-250 Migrating
Single-component cementitious slurry
Active chemicals form crystals within the concrete pore network to resist water penetration. Used for concrete waterproofing, including basements, retaining walls and lift pits, with positive or negative water pressure.
Before specifying: Mix the powder with clean water before brush or low-pressure spray application. Prepare and pre-wet the concrete; the GCC data sheet specifies curing for at least five days.
Read SikaSeal-250 product guidance04 / Active leak plugging
SikaMonoTop®-108 Water Plug
Rapid-setting cement mortar
A rapid-setting mortar for plugging running water leaks in concrete and masonry. It can form part of a waterproofing repair at leaking cracks, voids and casting joints.
Before specifying: Mix only small quantities for immediate use. Setting depends on temperature. This is a leak-plugging material; general concrete repairs and structural waterproofing need the appropriate repair system.
Read MonoTop-108 AE data sheet05 / Integral admixture
Sikalite® SA
Powdered waterproofing admixture enquiry
For projects specifying a waterproofing admixture in cement-based mortar or concrete, send the Sikalite SA specification and mix requirements for review.
Before specifying: Confirm current Saudi availability, the exact data sheet, dosage and mix compatibility before ordering. An admixture does not automatically replace membranes, joint sealing or the project waterproofing design.
View Sika GCC admixture rangeProduct references are for selection enquiries. Availability, pack size and the applicable Saudi product variant are confirmed with the quotation.
Start with the site condition
| Your requirement | Product family to review | Key check |
|---|---|---|
| Waterproof sound, stable concrete | SikaTop Seal 107 | Substrate movement and protection layer |
| Flexible waterproofing beneath tiles | Sikalastic-152 | Regional variant, crack behaviour and joint details |
| Crystalline treatment of concrete | SikaSeal-250 Migrating | Water pressure, substrate preparation and curing |
| Stop a localised running leak | SikaMonoTop-108 Water Plug | Leak source and follow-on waterproofing |
| Admixture for a specified cement mix | Sikalite SA enquiry | Local data sheet, dosage and mix approval |
For tanks, sewage exposure, bridge decks, parking structures or industrial floors, assess the complete system. A waterproofing coating is not automatically suitable for drinking water, chemical exposure, structural repair or direct traffic.
Plan the application before ordering
- 01. Assess and prepareIdentify leaks, movement, weak concrete and previous coatings. Repair defects and agree joint, penetration and wall-to-floor details.
- 02. Confirm the systemCheck the current local data sheet, required thickness, coverage, mixing and temperature limits. Plan protection from Saudi heat, sun and wind.
- 03. Inspect and hand overRecord material batches, coverage and coat continuity. Respect curing and waiting times before testing, tiling, immersion or service.
Application planning must follow the selected product data sheet, safety data sheet and approved project method statement.
Cement waterproofing & crack repair FAQs
How do I apply cementitious waterproofing slurry?
Prepare sound concrete, repair defects and detail joints first. Mix the complete product kit as instructed, then apply the specified coats and thickness. Follow the exact local product data sheet for substrate moisture, waiting times and curing; one method does not suit every cementitious product.
Which mortar should I choose for cracks or active leaks?
Identify whether a crack is moving, structural or leaking. Sikalastic-152 is a flexible waterproofing coating, not a structural crack repair. MonoTop-108 Water Plug is intended for active water leaks. Movement joints and structural cracks require a separately designed repair detail.
Can cementitious slurry be applied to a damp surface?
Many cementitious coatings need a prepared, pre-dampened substrate without standing water. Follow the selected product data sheet: moisture requirements differ. SikaSeal-250 Migrating requires a saturated surface-dry substrate.
How long does cementitious waterproofing last?
Service life depends on the selected system, substrate movement, exposure, detailing, application quality and maintenance. A fixed 20-year life cannot be promised from a product name. Warranty terms must be agreed in the approved project proposal.
Can crack-bridging mortar be applied to vertical surfaces?
Sikalastic-152 SA is non-sagging and suitable for vertical walls within its approved uses. Confirm the complete system for columns, overhead work and exposed or trafficked areas rather than treating the coating as structural reinforcement.
What does SolidDrops support for cementitious mortars?
SolidDrops supports product enquiries and selection for cementitious waterproofing, crack-bridging coatings, water-plug mortars and waterproofing admixtures. Share your substrate, exposure and specification so the exact product variant can be checked.
Which Saudi cities does SolidDrops support?
SolidDrops supports enquiries across Saudi Arabia, including Jeddah, Riyadh, Dammam, Jubail, Makkah, Madinah and Tabuk.
What information should I send for a quotation?
Send your city, area or quantity, site photos, BOQ or drawings, substrate condition, water exposure and target schedule. Include the product name or specification, required documents and any traffic, chemical exposure or cleaning requirements.
How can I contact SolidDrops?
Call or WhatsApp +966 50 213 1112, or email [email protected].
Project enquiries
Send the site details. Get a clearer recommendation.
Share your city, area or quantity, photographs, BOQ or drawings, substrate condition, water exposure and target schedule. Include the specified product and required documentation if available.
Supporting Jeddah, Riyadh, Dammam, Jubail, Makkah, Madinah, Tabuk and enquiries across Saudi Arabia.
Chat Online