Healthcare Deep Clean: Films & Betadine Gone
Restore clarity and hygiene. Stonkleen AS9 removes disinfectant films; SR9 handles Betadine. Soliddrops trains your team on dilution, dwell, and rinse steps so floors stay compliant.
Keep factory, warehouse, hospital, pharma, and food‑processing floors spotless and safe with Stonkleen cleaning chemicals. This step‑by‑step playbook covers daily, weekly, and deep‑clean routines for Stonhard floors, with correct dilution, equipment options, and pro tips. Soliddrops supplies genuine Stonhard products locally—plus training and support—across KSA & the GCC.
Industrial & healthcare floors encounter oils, tire marks, disinfectant films, and mineral deposits that everyday detergents can’t break down. Stonhard’s Stonkleen line is engineered to oxidize, degrease, and remove stubborn soils while preserving the floor’s finish. Benefits include targeted formulas by industry (industrial, food, healthcare), ease of use, and data‑sheet guidance for consistent results.
Designed for manufacturing and warehousing, TD9 erases rubber tire marks, cuts petroleum oils, and lifts industrial residues. Use in auto‑scrubbers or for targeted spot work.
FS9 targets food fats and organic soils typical in food service and food manufacturing, restoring safe traction and clean surfaces.
SR9 is used full strength on tough spots (including Betadine in healthcare). Spray, dwell briefly, agitate gently, extract, and rinse.
MD9 dissolves mineral deposits in wet areas (showers, drains, food processing), preventing cloudy film and scale.
DG2 is green‑certified and no‑VOC. Use by mop or auto‑scrubber for efficient daily cleaning without a rinse.
AS9 reliquifies aged finishes and sanitizing residues that dull floors in hygiene‑critical spaces, restoring clarity.
NC9 maintains acrylic finishes efficiently without dulling or damage.
Use soft nylon brushes, ~20‑gallon tanks, on‑board chemical systems, and simple one‑touch controls. Start with the lightest pressure to avoid micro‑scratches.
Great for tight or textured areas. If using degreasers, plan secondary extraction (wet vac/squeegee) since buffers don’t vacuum slurry.
For edges and corners. When using degreasers, always follow with secondary extraction and a clean‑water rinse.
Always remove loose debris before scrubbing; maintain squeegees/brushes/wheels; and pre‑wet floors before engaging brushes to prevent scratching.
Dry Debris Removal: Sweep or vacuum sand, dust, and grit to prevent abrasion and extend brush life.
Mop / Auto‑Scrub with DG2: Apply the green, no‑rinse cleaner by mop or machine to lift everyday oils and film efficiently.
Quick Spot Response: For scuffs or drips, treat immediately. Use SR9 neat on stubborn spots, dwell briefly, agitate, extract, rinse.
Rinse If Required: If a label calls for it (or for direct food‑contact zones), make a clean‑water pass to avoid residue.
TD9 for forklifts, petroleum oils, and metal oxides (manufacturing/warehousing). FS9 for fats, oils, and organic grime (food processing/service).
Measure concentrate and use calibrated dispensers. Over‑concentration wastes chemical and may leave residue; under‑concentration underperforms.
Dwell: Apply solution with vacuum/squeegee off to fully wet the floor. Allow 2–4 minutes of dwell; keep the surface wet.
Scrub & Extract: Engage brushes and vacuum to scrub thoroughly and pick up the dirty slurry.
Rinse: Refill with clean water and make a rinse pass, lightly scrubbing and extracting to leave the surface residue‑free.
Repeated disinfecting can leave films that trap soils and dull floors. AS9 reliquifies those residues for removal. Apply, dwell 2–4 minutes, scrub/extract, then finish with a clean‑water rinse.
For Betadine, use SR9 full strength. For tire marks in logistics corridors, use TD9 at 50%. For mineral deposits near sinks or wet areas, use MD9 at 50%; extract and rinse thoroughly.
Apply neat; dwell 30–60 seconds; agitate; extract; rinse. Ideal for ORs, labs, and clinics.
Apply 1:1 with water on marks; brief dwell; brush; extract; rinse. Repeat if a shadow remains.
Apply 1:1; allow dwell to dissolve scale; agitate if needed; extract; rinse. Schedule checks to prevent build‑up.
Soliddrops supplies genuine Stonkleen products, on‑site training, product data/SDS support, and responsive deliveries across KSA & the GCC.
Cut the grease. Clear the tire marks. Stonkleen TD9 erases forklift scuffs and oil residues fast. Pair TD9 with a walk‑behind or ride‑on scrubber for consistent, like‑new results. Soliddrops is the authorized Stonhard supplier in Saudi Arabia.
Restore clarity and hygiene. Stonkleen AS9 removes disinfectant films; SR9 handles Betadine. Soliddrops trains your team on dilution, dwell, and rinse steps so floors stay compliant.
Local expertise. Genuine products. From factories to hospitals, Soliddrops supplies authentic Stonhard floor cleaning materials across Saudi Arabia and the GCC with on‑site training and responsive support.
Use this feature to chat with our agent.