[email protected]

23 Aug Industrial Flooring & Waterproofing in Saudi Arabia: The 2025 Buyer’s Guide

Posted at 13:04h in Uncategorized by solid

Industrial Flooring & Waterproofing in Saudi Arabia: The 2025 Buyer’s Guide (by Solid Drops)

Looking for a flooring or waterproofing system that survives Saudi heat, heavy loads, and constant washdowns—without blowing your downtime? This guide from Solid Drops explains the options (epoxy, PU/Ucrete, ESD, vinyl/rubber, polyurea, injection waterproofing), how to choose the right system by industry, what a clean installation looks like, and how to maintain performance for years.

Quick CTA: Get a fast quote → | Talk to an engineer →

Table of Contents

 

Why KSA environments are tough on floors & membranes

Saudi facilities face extreme temperatures, sand/dust abrasion, aggressive chemicals/sanitizers, and high point loads from racking, MHE (forklifts, reach trucks), and constant foot traffic. Roofs and wet areas face UV exposure and thermal movement. The right specification prevents:

  • Cracking & delamination from thermal shock or poor prep
  • Osmotic blistering from moisture drive
  • Chemical attack from CIP, oils, acids/alkalis
  • Slip incidents in wet/greasy zones
  • Leaks through roofs, basements, wet rooms, tanks

 

Systems we install (and when to use each)

1) Industrial Epoxy Flooring (thin to heavy-duty)

  • Best for: warehouses, logistics, showrooms, dry production, car parks.
  • Options: self-leveling, high-build roll/roll, mortar screeds, anti-slip broadcast, line-marking.
  • Strengths: clean finish, chemical resistant, easy to maintain, excellent light reflectance.
  • Consider if: your area is mostly dry, moderate impact, and downtime is limited.

2) PU/Ucrete®-Type Heavy-Duty Screeds (polyurethane concrete)

  • Best for: food & beverage, commercial kitchens, pharma washdowns, freezers, thermal-shock areas.
  • Strengths: handles thermal cycles (steam/washdowns), high impact, strong chemical resistance, built-in texture for slip resistance.
  • Consider if: you need thickness (6–9 mm+) and performance under hot water and aggressive cleaning.

3) ESD/Conductive Floors

  • Best for: pharma, electronics, data centers, cleanrooms.
  • Strengths: controls static, protects sensitive components/processes.
  • Consider if: you have ATEX/ESD-sensitive zones or QA standards.

4) Vinyl / Rubber / Sports / Healthcare Floors

  • Best for: hospitals, schools, gyms, retail where comfort and hygiene matter.
  • Strengths: resilient, hygienic coved skirtings, designs/colours.

5) Waterproofing — Polyurea, PU, Acrylic, Bituminous & Injection

  • Roofs & exposed decks: polyurea or PU liquid-applied membranes for seamless, UV-resistant protection.
  • Basements, tanks, wet rooms: cementitious/PU membranes with detailing at joints/penetrations.
  • Crack & leak repair: PU/epoxy injection to stop active leaks and restore integrity.

Need help choosing? Speak to a specifier →

 

How to choose the right system by industry

Food & Beverage / Kitchens

  • PU/Ucrete-type screeds (6–12 mm), coving (100–150 mm), anti-slip texture, thermal-shock resistance.
  • Chemical resistance to acids/alkalis, fat/oil; slope-to-drain with stainless drains.

Pharma / Cleanrooms

  • Self-smoothing epoxy or ESD where required, seamless coving, low-VOC, cleanable finish.

Warehousing & Logistics

  • High-build or self-level epoxy, abrasion resistance, line-markings, joint arris repairs, flatness control.

Car Parks

  • Elastomeric/PU deck systems with crack-bridging, anti-skid, UV-resistant topcoat, colour zoning.

Roofs & Wet Areas

  • Polyurea/PU membranes with proper priming, upstands, termination bars, and expansion joint details.

Heavy Industry / Chemical

  • Epoxy mortars and chemical-resistant topcoats; consider secondary containment lining.

 

Our installation process (zero shortcuts)

  1. Survey & testing: moisture (MVER), RH, tensile pull-off (if needed), flatness, cracks/joints.
  2. Preparation: shot-blasting/diamond grinding; repair cracks/joints; arris rebuilds.
  3. Priming & moisture control: compatible primers; moisture-tolerant systems where required.
  4. System build: screed/build coats per spec; covings, details, and slopes.
  5. Quality control: DFT checks, pinhole tests, adhesion checks, and finish inspection.
  6. Handover: maintenance guide, cleaning schedule, and warranty terms.

 

Surface preparation: the difference-maker

Great materials fail on poor prep. We use professional shot-blasting and planetary grinding, then repair cracks/joints, treat oil contamination, and specify moisture barriers where needed. Result: reliable adhesion, uniform texture, and long service life.

 

Technical specs at a glance

System Typical Thickness Standout Properties Typical Areas
Epoxy high-build 0.5–1.5 mm Abrasion/chemical resistance, clean finish Warehouses, showrooms
Epoxy SL (self-level) 2–3 mm Smooth, hygienic, easy to clean Pharma, packaging
Epoxy mortar 4–6 mm High impact, repair power Heavy traffic aisles
PU/Ucrete-type 6–12 mm Thermal shock, heavy-duty, anti-slip F&B, kitchens, chillers
ESD epoxy 2–3 mm Static control Electronics, cleanrooms
PU deck (car park) 2–4 mm Crack-bridging, anti-skid, UV Car parks, ramps
Polyurea/PU membrane 1.5–2.5 mm Seamless, fast-cure, UV Roofs, podiums
Cementitious/PU waterproofing 2–3 mm Negative/positive side waterproofing Basements, tanks

Note: We tailor resin type, texture (R10–R13), and topcoat chemistry to your specific chemicals, temperatures, and cleaning regime.

 

Case study snapshots (replace with your data before publishing)

  • Food factory, Jeddah – 3,600 m²: 9 mm PU screed with coves, steam-clean zones, slope-to-drain; downtime: 72 hours per bay; result: improved hygiene and slip resistance.
  • Pharma packaging, Dammam – 2,200 m²: 3 mm self-level epoxy, ESD in filling zone, coved skirtings; result: particulate control and cleanroom compliance support.
  • Retail car park, Riyadh – 25,000 m²: PU deck system with colour zoning, anti-skid ramps; result: reduced tyre noise and safer traffic flow.

Replace with your real projects, dates, and outcomes. Add photos with descriptive alt text (e.g., “9 mm PU screed with coved skirting in Saudi food plant”).

 

Safety, worker welfare & human rights

At Solid Drops, delivering durable systems goes hand-in-hand with ethical and safe practices:

  • Zero tolerance for unsafe work: trained crews, PPE, confined-space protocols, and MSDS compliance.
  • Worker welfare: no recruitment fees, proper accommodation, access to passports, fair wages, and clear grievance channels.
  • Respect & inclusion: no discrimination; respectful sites and supervision.
  • Environmental care: low-VOC options where possible; responsible disposal of waste and packaging.

(If you have a formal policy, link it here: /about/worker-welfare-and-human-rights.)

 

Maintenance & cleaning checklist

  • Use neutral pH cleaners compatible with your system; avoid harsh solvents unless the spec allows.
  • Install entrance mats to reduce sand ingress; protect heavy impact points with plates/guards.
  • Inspect quarterly: joints, drains, slopes, and high-traffic lines. Repair chips early.
  • Re-topcoat decorative/UV-exposed systems per manufacturer guidance to extend life.

 

FAQs (10 common questions)

1) How fast can we return to service?
Epoxy SL often allows light foot traffic in 24 hours; PU/Ucrete-type screeds can handle earlier washdowns/thermal cycles once fully cured. We’ll schedule phasing to minimise downtime.

2) What if my slab has moisture?
We test MVER/RH. If high, we add a moisture-tolerant primer/barrier to prevent osmotic blistering.

3) Can you make the floor anti-slip but easy to clean?
Yes—by selecting the right broadcast aggregate and topcoat. Kitchens and ramps need higher texture than dry packaging areas.

4) Do you do ESD floors?
Yes. We install conductive/ESD systems with verified readings.

5) Which system is best for hot water washdowns?
PU/Ucrete-type screeds (6–12 mm) handle thermal shock from steam and hot water.

6) What about chemical resistance?
We match resin chemistry to your chemical list (acids/alkalis/oils/sanitizers) and provide data sheets during spec.

7) Do you work across KSA?
Yes—projects in Riyadh, Jeddah, Dammam and beyond. Ask for references near you.

8) Can you fix active leaks?
For basements/tanks/wet rooms, we use PU/epoxy injection to stop active leaks before applying membranes.

9) How long does a system last?
Depends on traffic, cleaning, temperature, and thickness. With proper maintenance, heavy-duty systems deliver multi‑year performance. We’ll advise the right lifecycle plan.

10) Can you work nights or in phases?
Yes. We plan phased installs to keep operations running and limit shutdowns.

 

Ready to start?

Tell us about your area (m²), industry, chemicals, temperature, and downtime. We’ll propose the right build-up, timeline, and budget.

Helpful internal links (edit to your actual URLs)

  • Epoxy Flooring in Saudi Arabia → /services/epoxy-flooring
  • PU/Ucrete Heavy-Duty Flooring → /services/pu-ucrete-flooring
  • ESD & Cleanroom Floors → /services/esd-flooring
  • Roof & Basement Waterproofing → /services/waterproofing
  • About Solid Drops → /about
  • Projects → /projects
  • Contact → /contact

Prepared by the Solid Drops engineering team. For Arabic version, mirror this article and set hreflang tags for ar and en.

Print page
0 Likes


Chat Online
1