12 Jan SOLIDDROPS | Industrial Floor Cleaning Material in Saudi Arabia (KSA)
Best Industrial Floor Cleaning Material in Saudi Arabia (KSA) — Consultant Guide + Stonkleen TD9 Available
Facilities and consultants don’t select one “magic cleaner” for every site. The correct choice depends on floor type, contamination (oil/grease/tire marks), and industry (food, pharma, warehouses, workshops). This page provides a practical selection framework, dilution ratios, cleaning schedules, and product examples— with Stonkleen TD9 positioned as the best all-around option for most industrial resin floors in Saudi Arabia.
Ready Summary (for quick decisions)
Best “One Cleaner” for Most Industrial Resin Floors in KSA
Epoxy / PU / PU-Cement- Recommended: Stonkleen TD9 (Stonhard) — heavy-duty alkaline, low-foam, auto-scrubber friendly.
- Removes: oil, grease, forklift tracks, tire marks, industrial grime.
- Daily ratio: 1:50 to 1:80 (TD9:water). Weekly deep clean: 1:30 to 1:40. Heavy grease: 1:10 to 1:20.
- Safety rule: do not mix with acids or bleach; always test a small area first and follow the latest manufacturer SDS/TDS.
- Saudi supply: SolidDrops offers stock availability and project support across major KSA cities.
What NOT to Use (common coating killers)
Very ImportantAcid cleaners • Bleach on PU systems • Abrasive powders • Solvent-only cleaning routines that stress coatings
If you are unsure whether your floor is epoxy, PU, PU-cement, or bare concrete: identify the system first. Using the wrong chemistry is one of the fastest ways to reduce coating life.
ملخص سريع (للنتائج السريعة)
إذا كنت تريد منظفًا واحدًا يغطي معظم أرضيات المصانع (إيبوكسي / بولي يوريثان / PU-Cement) في السعودية: Stonkleen TD9 خيار عملي ومعتمد عند كثير من الاستشاريين بسبب فعاليته مع الزيوت والشحوم وآثار الإطارات وانخفاض الرغوة (مناسب لآلات الغسيل).
نسب التخفيف الشائعة: تنظيف يومي 1:50 إلى 1:80، تنظيف أسبوعي 1:30 إلى 1:40، إزالة شحوم قوية 1:10 إلى 1:20. يمنع خلطه مع الأحماض أو الكلور.
Best Industrial Floor Cleaning Materials (by floor type)
There is no single “best” industrial floor cleaning chemical for every site. The best choice is determined by: surface type (resin vs concrete), soil load (oil/grease vs dust), and industry controls (HACCP/GMP requirements).
Epoxy / PU / PU-Cement Floors
Factories • Food Plants • Warehouses- Best overall (consultant pick): Stonkleen TD9 (Stonhard) — alkaline heavy-duty degreaser; coating-friendly; removes tire marks and oils.
- Same category alternatives/examples: Stonkleen SM (Stonhard) (stronger degreasing), Diversey Suma Break Up (food-safe positioning), Ecolab Topmatic (machine-friendly positioning).
- Practical note: Low-foam chemistry matters for auto-scrubbers and reduces residue on resin floors.
Concrete Floors (Uncoated)
Workshops • Warehouses- Best approach: a strong alkaline degreaser (pH ~11–13), typically sodium-metasilicate based, non-acidic for routine degreasing.
- Examples mentioned in the market: Ecolab Turbo Degreaser, 3M Industrial Cleaner, Diversey Taski Jontec.
- Caution: Avoid acids on raw concrete unless the task is true descaling and you understand the risks (etching / damage).
Car Parks & Traffic Decks
Tire Marks • Forklift Tracks- Best approach: low-foam alkaline cleaner for tire mark removal and compatibility with coated systems.
- Examples: Stonkleen TD9, Diversey Jontec Tensol, Ecolab Powerfoam.
- Execution tip: Use dwell time + mechanical agitation (pads/brushes) for tracks, then rinse if required.
Heavy Oil, Grease & Maintenance Bays
Workshops • Repair Zones- Best approach: solvent-boosted alkaline degreaser that emulsifies oils (preferably non-flammable programs for safer operations).
- Examples: Stonkleen SM, Zep Industrial Purple, CRC Industrial Degreaser.
- Key success factors: correct dilution + dwell time (5–10 minutes) + scrubbing + proper rinse/collection.
Food & Pharmaceutical Areas (HACCP / GMP zones)
Food-Grade / Controlled CleaningIn food and pharma, “best” means you meet hygiene controls while protecting the floor system and avoiding residues. A food-grade alkaline program is commonly selected; rinse with potable water if required by your standard.
- Best approach: food-grade alkaline cleaner, controlled dilution, documented SOPs.
- Examples: Ecolab Klercide, Diversey Suma Range, and Stonkleen TD9 (used in diluted form when appropriate).
Why Stonkleen TD9 is the preferred “90% solution” for resin floors
If your operation needs one dependable industrial floor cleaning material for most epoxy/PU/PU-cement environments, Stonkleen TD9 is often selected because it balances cleaning power, coating compatibility, and low-foam performance.
Technical & operational advantages
Auto-scrubber friendly- Alkaline heavy-duty degreasing: effective on oils/grease without relying on harsh acid programs.
- Low foam: supports consistent recovery in scrubber-dryers and reduces re-deposition.
- Resin-floor compatible: intended for epoxy, PU, and PU-cement floors when used correctly.
- Common industrial use cases: food & beverage plants, pharma factories, warehouses, industrial kitchens, loading bays, and car parks.
- Extends coating life: correct chemistry + correct dilution + correct frequency typically reduces premature wear.
Typical packaging
KSA supply- Packs: 5 L / 20 L (typical)
- Storage: sealed, cool, shaded area
- Equipment: auto-scrubber, rotary scrubber, mop
- SolidDrops: stock availability + project support
Replace product images with your own licensed photos for best SEO and compliance.
Recommended Dilution Ratios — Stonkleen TD9 (Consultant Guide)
Use warm water when possible for best performance. Always test in a small area first. Do not mix with acids or bleach.
| Application | Dilution (TD9 : Water) | Notes |
|---|---|---|
| Daily light cleaning (dust, light traffic) | 1 : 50 – 1 : 80 | Auto-scrubber / mop |
| Weekly general cleaning | 1 : 30 – 1 : 40 | Most factories & warehouses |
| Heavy grease & oil | 1 : 10 – 1 : 20 | Dwell 5–10 minutes, scrub |
| Tire marks / forklift tracks | 1 : 10 | Low-foam; rinse if required |
| Food processing areas | 1 : 40 – 1 : 60 | Rinse with potable water (per SOP) |
| Spot cleaning (localized) | 1 : 5 – 1 : 10 | Brush/scrubber, rinse |
Suggested Cleaning Schedule (Best Practice in KSA Facilities)
Factories / Warehouses
Epoxy / PU / PU-Cement- Daily: auto-scrubber @ 1:50–1:80
- Weekly: deep clean @ 1:30–1:40
- Monthly / as needed: degrease heavy-load zones @ 1:10–1:20
Food & Pharma
HACCP / GMP zones- Daily (end-of-shift): 1:40–1:60
- Weekly: deep sanitation @ ~1:30 (per SOP)
- As required: local degreasing @ ~1:10
Car Parks / Loading Bays
Traffic decks- Daily: sweep + spot clean
- Weekly: auto-scrubber @ 1:20–1:30
- Monthly: tire-mark treatment @ ~1:10
Consultant-Ready Documents (On-Page Version)
Below is a clean, client-friendly version of a TD9 technical summary, safety notes, and a one-page SOP. If you want these as branded PDFs, place download buttons here later.
Technical Data Summary (TDS-style)
EN / ARProduct: Stonkleen TD9
Brand: Stonhard
Type: Heavy-duty alkaline industrial floor cleaner / degreaser (low-foam)
Designed for: epoxy, polyurethane (PU), PU-cement floors (and compatible coated traffic decks)
Removes: oils, grease, tire marks, industrial contamination
Supplier (KSA): SolidDrops Trading & Contracting
وصف المنتج
Stonkleen TD9 منظف صناعي قلوي قوي للأرضيات الإيبوكسية والبولي يوريثان وPU-Cement. يساعد على إزالة الزيوت والشحوم وآثار الإطارات مع رغوة منخفضة (مناسب لآلات الغسيل).
Safety Notes (SDS-style summary)
Operations safety- Non-flammable program: use standard chemical handling controls.
- PPE: gloves + eye protection recommended for handling concentrates.
- Never mix: acids or bleach.
- Always: follow your site SOP and the latest manufacturer SDS/TDS.
One‑Page SOP (Site Poster Text)
Print & laminateSTONKLEEN TD9 — FLOOR CLEANING SOP
- Dilution: Daily 1:60 • Weekly 1:30 • Heavy grease 1:10
- Daily: Sweep → Auto-scrubber with TD9 (1:60)
- Weekly: Deep scrub → Rinse with clean water (as required)
- Monthly: Degrease heavy-traffic zones
- Do not: use acid • use bleach • overdose concentrate • skip rinsing where SOP requires
- Supply & support: SolidDrops Trading & Contracting — +966 50 213 1112
All Products Mentioned on This Page (including alternatives/examples)
This list is included for transparent comparison and consultant-style specification discussions. If you need the best “single solution” for industrial resin floors, SolidDrops recommends and supplies Stonkleen TD9.
Stonkleen TD9 (Stonhard)
Heavy-duty low-foam alkaline cleaner for epoxy/PU/PU-cement floors; removes oil, grease, tire marks. SolidDrops stock available in KSA.
Stonkleen SM (Stonhard)
Stronger degreasing category option for heavy contamination where additional bite is required.
FAQ — Industrial Floor Cleaning (KSA)
What is the best industrial floor cleaning material in Saudi Arabia for epoxy/PU floors?
For many factories, warehouses, and food plants using epoxy/PU/PU-cement floors, a low-foam alkaline heavy-duty cleaner is commonly preferred. Stonkleen TD9 is a practical “one cleaner for most sites” option because it targets oil, grease, and tire marks while remaining compatible with resin floors when used at correct dilution.
Can I use acid cleaners on epoxy or PU floors?
Typically, acids are not recommended for routine cleaning on epoxy/PU floors because they can damage coatings and shorten service life. Use an alkaline program (like TD9) unless a controlled, specialist descaling task is required and validated.
What dilution should I use for daily cleaning with Stonkleen TD9?
A common daily cleaning ratio is 1:50 to 1:80 (TD9:water). For weekly deep cleaning: 1:30 to 1:40. For heavy grease/oil: 1:10 to 1:20 with dwell time (5–10 minutes) and scrubbing.
Is Stonkleen TD9 safe for auto-scrubbers?
TD9 is positioned as low-foam, which is beneficial for scrubber-dryer operation. Foam control improves recovery performance and reduces residues. Always match pads/brushes and dilution to the soil load.
Which cities in KSA do you cover?
SolidDrops supports customers all over Saudi Arabia, including Jeddah, Riyadh, Dammam, Jubail, Makkah, Madinah, and Tabuk. Contact us to confirm delivery timelines and bulk quantities for your location.
Do you provide SOPs and consultant-style documentation?
Yes. SolidDrops can support sites with a simple SOP approach (dilution, frequency, and do-not-use list) and can format client-ready documentation aligned with industrial operations requirements.
Request Supply, Bulk Pricing, or Project Support (KSA)
For fast procurement and continuity, contractors and facilities typically lock one approved chemical program and keep it consistent. SolidDrops supports industrial clients with available stock of Stonkleen TD9, plus guidance on dilution ratios and cleaning schedules.
Commercial format (quotation-ready structure)
Prices: On requestProduct: Stonkleen TD9 (Stonhard)
Supplier: SolidDrops Trading & Contracting
| City | 5 L | 20 L | Notes |
|---|---|---|---|
| Jeddah | On request | On request | Stock availability |
| Riyadh | On request | On request | Bulk discount (quantity-based) |
| Dammam | On request | On request | Project supply |
| Jubail | On request | On request | Industrial focus |
Chat Online